Abstract
Diethyl ether (DEE) has evolved as a potential alternative for partial diesel replacement in compression ignition (CI) engines. In this study, a light-duty commercial diesel engine was operated in partially premixed combustion (PPC) mode. This work investigated the engine characteristics with lower and higher DEE-diesel blends in PPC mode. The split ratio and the start of the main injection (SoMI) timings were maintained at 70:30 (Main: Pilot) and 9° bTDC, respectively, while the start of the pilot injection (SoPI) timing was varied from 25 to 40° bTDC. The performance, combustion, and regulated emission characteristics of the PPC engine were compared with the conventional diesel combustion (CDC) mode as a baseline. The PPC mode exhibited higher/ comparable brake thermal efficiency (BTE) than the baseline CDC mode. The DEE-diesel blends exhibited higher BTE than the diesel in PPC mode generally. The DEE40 showed greater improvement in BTE than DEE20 at lower brake mean effective pressure (BMEP). PPC mode fuelled with diesel and diesel-DEE blends showed lower brake specific fuel consumption (BSFC) than baseline CDC mode at lower BMEP, but it was comparable at higher BMEP. PPC mode showed higher carbon monoxide (CO) emissions than baseline CDC mode. CO emissions increased with advancing SoPI timing for all BMEPs, except 5.6 bar. Although, the PPC mode exhibited higher hydrocarbon (HC) emissions than the CDC mode. Diesel-DEE blends showed slightly higher HC emissions than diesel in PPC mode at lower engine BMEPs. NOx emissions in the PPC mode were 1.5 to 2 times the baseline CDC mode. This indicated that the PPC mode engine performance requires further optimization similar to CDC mode, which had optimized exhaust gas recirculation (EGR), and significantly reduced the nitrogen oxide (NOx) emissions.
View more >>