Optimization of Drilling Parameters for Material Removal Rate on 41cr4 Using Taguchi Design

Abstract

In manufacturing industries the largest amount of money spent on drills. Therefore, from the viewpoint of cost and productivity, modeling and optimization of drilling processes parameter are extremely important for the manufacturing industry this paper presents a detailed model for drilling process parameter. The detailed structure includes in the model, are three parameters such as such as Spindle Speed, feed and depth of cut on material removal rate in drilling of 41 Cr 4 material using HSS spiral drill .We an effect of this three parameters on material removal rate .The detailed mathematical model is simulated by Minitab14 and simulation results fit experiment data very well In this investigation, an effective approach based on Taguchi method, analysis of variance (ANOVA), multivariable linear regression (MVLR), has been developed to determine the optimum conditions leading to higher MRR. Experiments were conducted by varying Spindle Speed, feed and depth of cut using L9 orthogonal array of Taguchi method. The present work aims at optimizing process parameters to achieve high MMR. Experimental results from the orthogonal array were used as the training data for the MVLR model to map the relationship between process parameters and MMR the experiment was conducted on drilling machine. From the investigation It concludes that speed is most influencing parameter followed by feed and depth of cut on MRR.